E3-10RTD-1 (10 RTD Inputs)

Analog Input Channels

• RTD input range: -200-850 deg C
• RTD overall accuracy: .05% or .5 deg C
• A/D resolution 16 bits (0.003%)
• Temperature coefficient +/- 50 ppm per °C (span and offset)
• RTD Type: 100 Ohm Platinum
• RTD Alpha: .00385 or .00392
• RTD Connections: 2 or 3-wire
• Scan time: 550 ms for all 10 channels
• Max lead wire resistance: 100 Ohms per side balanced
• RTD excitation current:  250uA pulsed to reduce self-heating

Serial Ports 

RS-485 port, Screw terminals (485+, 485-, GND) (2-wire half-duplex, isolated)
Isolations voltage, 150V
RS-485 networking, Up to 32 (full-load) stations
RS-485 distance, Up to 0.5 miles (baud rate dependent)
Baud Rates from 150 to 57,600 baud
Protocols: master and slave: Sixnet® and Modbus RTU / ASCII
Diagnostic LEDs: Transmit (TD) and Receive (RD)

Environmental

• Operating temperature: -40 to 75°C
• MTBF: 1,294,803 Hours GB @ 40°C per MIL-HNDBK-217F2

​​​Configuration

• Configured using Crimson® 3.x software
• Graphical User Interface (GUI)