E3-MIX20884-1 (32 Mixed Inputs/Outputs)
Original price was: $1,569.00.$1,510.00Current price is: $1,510.00.
Available!
E3 I/O module, 12 DI (DC), 8 DI/DO (DC), 8 AI (mA), 4 AO (mA and V)
I/O Module-32 Mixed
Isolated Discrete Input Channels
Channels: 1-4
Voltage range: 5 – 30 VDC
Guaranteed ON voltage: 3.0 VDC
Guaranteed OFF voltage: 1.5 VDC
Guaranteed OFF current: 1 mA DC
Input resistance (@ 24 VDC): 2.5K Ohms
Input current (@ 24 VDC): 9.6 mA
Common mode and channel-to-channel Isolation: 150 VDC
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate)
Fastest response: 1 ms (400 Hz. max. counting rate)
Special fast counting rate: Up to 50 KHz
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting
Non-Isolated Discrete Input Channels
Channels: 5-12
Voltage range : 10 – 30 VDC
Guaranteed ON voltage: 9.0 VDC
Guaranteed OFF voltage: 5.0 VDC
Guaranteed OFF current: 2 mA DC
Input resistance: 10K Ohms
Input current (@ 24 VDC) 3 mA
Input Polarity: Sourcing (apply power to active) or sinking (ground closure) on 8 inputs
Input Protection: High Impedance with overvoltage protection
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate)
Fastest response: 1 ms (400 Hz. max. counting rate)
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting
Non-Isolated Combination Discrete Input Channels
Channels: 13-20
Channel Type: Discrete input and discrete output combination channel (software selectable)
Voltage range : 10 – 30 VDC
Guaranteed ON voltage: 9.0 VDC
Guaranteed OFF voltage: 5.0 VDC
Guaranteed OFF current: 2 mA DC
Input resistance: 10K Ohms
Input current (@ 24 VDC) 3 mA
Input Protection: High Impedance with overvoltage protection
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate)
Fastest response: 1 ms (400 Hz. max. counting rate)
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting
Discrete Output Channels
- Output voltage range 10-30 VDC
- Max. output power: 0.6A per channel, 4.8A max
- Max. off state leakage: 0.01 mA (less than 10 uA)
- Short circuit protection, self-reset fuses (trip above 1.5 Amp)
- Min. load: 1 mA
- Inrush current: 5 Amps (100 ms surge)
- Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp)
- All channels Scan rate: 1 ms
Analog Input Channels
- Analog Input Range: 4-20 mA
- A/D resolution 16 bits (0.003%) 10 bits (fast option)
- Full scale accuracy: +/- 0.02% (at 20 °C, 16 bit mode)
- Temperature coefficient +/- 50 ppm per °C (span and offset)
- Input impedance (resistance): 100 ohms
- Protection: Self-resetting short circuit protection fuses
- DMRR (differential mode) 66 db at 50/60 Hz
- Fastest update time [# of chan.]: 880 ms [all] -16-bit; 145 ms [all] -14-bit; 1 ms [2] -10-bit
Analog Output Channels
Analog output range: 4-20 mA, 0-20 mA, 0-5 VDC
D/A resolution 16 bits (less than 1 uA)
Full scale accuracy +/-0.02% (at 20°C); All ranges after calibration
4-20mA full scale accuracy +/-0.02% (at 20°C); Before calibration
0-20mA full scale accuracy +/-0.1% (at 20°C); Before calibration
Span and offset temp. +/- 50 ppm per °C typ.
Max. output settling time 5 ms (to .05%)
Max. Load resistance (@ 24 V) 750 Ohms
Max. Load resistance (@ 10V) 300 Ohms
Current limiting short circuit protection
0-5VDC full scale accuracy +/-0.5% (at 20°C); Before calibration
Min. load resistance (0-5VDC range): 20 KOhms
Configuration
- Configured using Crimson® 3.x software
- Graphical User Interface (GUI)
Additional information
Weight | 2 lbs |
---|